THIS SITE IS LIVE AND ALL INFORMATION IS CORRECT FOR 2017 -
COMMON CABRIOLET FAULT
WINDOWS WORK WITH HOOD AND CENTRAL SWITCHES, BUT NOT WITH DOOR SWITCHES
THIS IS A MODULE FAULT!!!!!!!!!, REPAIRED MANY
(AFTER PEOPLE HAD WASTED MONEY ON NEW SWITCHES)
TEST INFORMATION FOR 6 PIN PLUG
IF YOU WANT TO TEST YOUR 6 PIN PLUG, TEST AS FOLLOWS
(PIN NUMBERS MARKED ON PLUG SHELL)
WINDOW STUCK OPEN???
TRY THIS, IT MAY WORK
(note 40A fuse is for the back windows. Front windows have a 25A fuse for each side located next to the 40A fuse.)
Sit in the car, doors closed and unlocked.
1: Unplug the fuse for the offending window
2: Re-insert fuse.
3: Press lock twice on your key card (this should activate deadlock and bring the window up 2-3 inches)
4: Unlock car as normal
5: Repeat steps 1-4 until window is closed.
6: Unplug offending window fuse to disable the motor.
THIS WILL WORK!!!!!!!
REMOVE THE DOOR PANEL AS SHOWN ABOVE, REMOVE THE WINDOW MODULE, INSIDE THE HOLE IN THE MOTOR WHICH THE MODULE SITS ARE 2 METAL PINS, YOU CAN USE A BATTERY CHARGER TO RUN THE MOTOR UP OR DOWN, DEPENDING ON WHICH WAY YOU CONNECT IT TO THE PINS
(USE LONG STIFF CONDUCTORS INSULATED WITH ANY TAPE
AT HAND TO STOP THEM SHORTING, LEAVING 2MM BARE ENDS.)
IF NOT PLEASE CONTACT ME
DON'T BE AFRAID TO ASK !!!!
E-MAIL - PROLUXELECTRONICS@HOTMAIL.COM
I do not repair or sell cheap dangerous replacment relay units as found on e-bay. If you buy one of these unit read the sellers liability disclaimer and fit at your own risk and anyone in contact with the cars windows.